I tried ./ as well as the absolute path to the package. ipkg still tries to download the v2 pkg specified by the feed instead of using the file...
I don't have this problem when I build a newer version of a package; I have private versions of bind, dhcp, openssl that all use the file when I specify it.
The strange behavior seems to be unique to the down-rev kit.
--- In nslu2-linux@
>
> You can try "ipkg install ./freeradius_
>
> For building optware/nslu2 (unslung) toolchain, it's probably easier just use latest make/crosstool.
>
> Cheers,
>
> -Brian
>
> --- In nslu2-linux@
> >
> >
> >
> > Thanks for the clues. I built the package - details below.
> >
> > But ipkg now refuses to install it! If I say:
> > $ ipkg install freeradius_1.
> > ipkg starts downloading the 2.0.5-2 package from the unslung/cross feed!
> >
> > I've tried -force-downgrade, even -f /dev/null. But (as demonstrated with strace) ipkg goes and reads the /etc/ipkg feed files & then downloads the 2.0.5-2 package.
> >
> > I note that this package has a 'recommends' for freeradius-doc; putting that kit in the same directory doesn't help.
> >
> > The only way to persuade it to use the file specified on the command line is to
> > $ mv /etc/ipkg /etc/ipkg-x; ipkg install freeradius_1.
> >
> > This seems excessively hard - if I explicitly specify a file, that's what I want.
> >
> > Is there an option that I'm missing? If not this seems like a (moderately serious) bug.
> >
> > Other thoughts?
> >
> > Thanks.
> >
> > T
> >
> > Here's what it took to build this package - I'll make a wiki HOWTO when I've dug out of the current crisis...meantime, perhaps this will help someone else.
> >
> > $ svn co https://svn.
> > $ svn log make/freeradius.
> > # r8749 is the rev that upgraded from 1.1.7
> > $ svn up -r8748 <-- We want the rev BEFORE the upgrading commit!
> > $ cd optware; make <platform>-target
> > $ cd <platform>; make directories toolchain ipkg-utils
> >
> > Build fails because crosstool 0.38 isn't available.
> > Visit http://kegel.
> >
> > Edit optware/make/
> >
> > $ make toolchain ipkg-utils
> > Ignore lots of glib doesn't build unoptimized errors...
> >
> > $ make freeradius
> >
> > Depends on openssl, site is down. Modify optware/make/
> >
> > OPENSSL_SITE=http://www.mirrorse
> >
> > Depends on mysql - for some reason, the kit downloads into '.' rather than 'downloads/'
> >
> > $ mv mysql downloads/
> > $ make freeradius
> >
> > Curses! ncurses-5.6.
> >
> > $ make mysql
> >
> > $ make freeradius
> > $ make freeradius-ipk
> >
> > and freeradius_1.
> >
> > --- In nslu2-linux@
> > >
> > > Optware package changes are all recorded in subversion.
> > >
> > > 1) Follow the instruction on
> > > http://www.nslu2-
> > > to get optware subversion checkout;
> > >
> > > 2) Then do "svn log make/freeradius.
> > >
> > > 3) You'd want to "turn back the clock"
> > > The command probably is "svn up -r8749"
> > >
> > > 4) Build toolchain, and try to build the package
> > >
> > > I think I've noticed that in order to build unslung toolchain, you'd need host gcc 3.x
> > >
> > > Good luck,
> > >
> > > -Brian
> > >
> > > --- In nslu2-linux@
> > > >
> > > > I'm rebuilding an unslung system from a disk failure, looking for freeradius 1.1.7-2 - not quite ready to update to freeradius V2 - which is the current feed.
> > > >
> > > > Is the old .ipk file available somewhere? If not, is there a way to build it from the source repository?
> > > >
> > > > It would be good to have a HOWTO that describes how to get the build system to to build a specific version of any package - if someone can give me the necessary clues, I'll be happy to add to the wiki.
> > > >
> > > > Thanks.
> > > >
> > >
> >
>
No comments:
Post a Comment