linuxgeek: [nslu2-linux] Re: Debian Slug USB issues

Answering my own question... ;-)

I replaced the power supply and the USB issues have gone.

It seems it's easier to build a fairly complex mini computer (NSLU2) than it is to deliver a decent power supply that works for more than a year...

--- In nslu2-linux@yahoogroups.com, "pulse_and_saw" <vco1@...> wrote:
>
> Hi,
>
> I've run my Slug with Debian Lenny relatively trouble-free for some time. A month or so ago however it failed booting from the attached 2.5" USB HDD (bus-powered). After replacing that disk with a self-powered 3.5" USB HDD all was fine again. When I was trying to find the cause for that problem, I did discover that plugging a new power supply into the Slug made it recognize the old HDD. So I guess the power supply couldn't provide the power to the USB port anymore.
>
> Anyway, all was fine until about a week ago when one of my Slug drives was stuck in the middle of a backup: no i/o anymore. I found USB related errors in the log files.
>
> This is what my setup looks like:
>
> SLUG -> USB1 -> 3.5" HDD (self powered - Boot volume)
> |-> USB2 -> 4 port bus powered Hub -> 3.5" HDD (self powered)
> |-> 3.5" HDD (self powered)
>
> What happens is that whenever I plug in a USB Hub (I've tried 2), the Slug fails to boot. Even if the boot disk is plugged directly into the Slug. If I plug in the USB Hub after boot, I get all kinds of USB errors, e.g. unable to enumerate USB device on port x in kern.log.
>
> Could all of this be a sign that the Slug power supply is dying?
>
> Would it be safe to use a powered USB Hub with the Slug? I remember that when I once tried this, it seemed the Hub was also powering the Slug itself (USB power flowing back into the Slug?).
>
> If it is the power supply, what would be a good replacement? It seems this particular voltage and plug is not very common.
>
> Thanks in advance for your help/tips/suggestions.
>