Friday, November 1, 2013

Re: [LINUX_Newbies] Xubuntu 13.04 to 13.10 crashed SECOND:

SECOND:

Maybe this can help:





[code]
:~$ lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation 82975X Memory Controller
Hub [8086:277c]
Subsystem: Dell Device [1028:01de]
Kernel driver in use: i82975x_edac
00:01.0 PCI bridge [0604]: Intel Corporation 82975X PCI Express Root
Port [8086:277d]
Kernel driver in use: pcieport
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High
Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Dell Device [1028:01de]
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI
Express Port 1 [8086:27d0] (rev 01)
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7
Family) PCI Express Port 5 [8086:27e0] (rev 01)
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7
Family) PCI Express Port 6 [8086:27e2] (rev 01)
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB
UHCI Controller #1 [8086:27c8] (rev 01)
Subsystem: Dell Device [1028:01de]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB
UHCI Controller #2 [8086:27c9] (rev 01)
Subsystem: Dell Device [1028:01de]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB
UHCI Controller #3 [8086:27ca] (rev 01)
Subsystem: Dell Device [1028:01de]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB
UHCI Controller #4 [8086:27cb] (rev 01)
Subsystem: Dell Device [1028:01de]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2
EHCI Controller [8086:27cc] (rev 01)
Subsystem: Dell Device [1028:01de]
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family)
LPC Interface Bridge [8086:27b8] (rev 01)
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01)
Subsystem: Dell Device [1028:01de]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA
Controller [AHCI mode] [8086:27c1] (rev 01)
Subsystem: Dell Device [1028:01de]
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus
Controller [8086:27da] (rev 01)
Subsystem: Dell Device [1028:01de]
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV41GL
[Quadro FX 3450/4000 SDI] [10de:00cd] (rev a2)
Subsystem: NVIDIA Corporation wx4300 Workstation [10de:029b]
Kernel driver in use: nouveau
04:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme
BCM5754 Gigabit Ethernet PCI Express [14e4:167a] (rev 02)
Subsystem: Dell Precision 390 [1028:01de]
Kernel driver in use: tg3
90:~$



~$ cat /var/log/Xorg.0.log
[ 30.290]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 30.290] X Protocol Version 11, Revision 0
[ 30.290] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu
[ 30.290] Current Operating System: Linux
ah-Precision-WorkStation-390 3.11.0-12-generic #19-Ubuntu SMP Wed Oct 9
16:12:00 UTC 2013 i686
[ 30.290] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic
root=UUID=470c751e-f524-4552-97bd-37e28cd4c792 ro quiet splash vt.handoff=7
[ 30.290] Build Date: 15 October 2013 09:23:29AM
[ 30.290] xorg-server 2:1.14.3-3ubuntu2 (For technical support please
see http://www.ubuntu.com/support)
[ 30.290] Current version of pixman: 0.30.2
[ 30.290] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 30.290] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.290] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 31
17:21:23 2013
[ 30.318] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 30.318] (==) No Layout section. Using the first Screen section.
[ 30.318] (==) No screen section available. Using defaults.
[ 30.318] (**) |-->Screen "Default Screen Section" (0)
[ 30.318] (**) | |-->Monitor "<default monitor>"
[ 30.318] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 30.318] (==) Automatically adding devices
[ 30.318] (==) Automatically enabling devices
[ 30.319] (==) Automatically adding GPU devices
[ 30.319] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not
exist.
[ 30.319] Entry deleted from font path.
[ 30.319] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not
exist.
[ 30.319] Entry deleted from font path.
[ 30.319] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 30.319] Entry deleted from font path.
[ 30.319] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
built-ins
[ 30.319] (==) ModulePath set to
"/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 30.319] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 30.319] (II) Loader magic: 0xb77a66a0
[ 30.319] (II) Module ABI versions:
[ 30.319] X.Org ANSI C Emulation: 0.4
[ 30.319] X.Org Video Driver: 14.1
[ 30.319] X.Org XInput driver : 19.1
[ 30.319] X.Org Server Extension : 7.0
[ 30.319] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 30.320] (--) PCI:*(0:1:0:0) 10de:00cd:10de:029b rev 162, Mem @
0xed000000/16777216, 0xd0000000/268435456, 0xee000000/16777216, BIOS @
0x????????/131072
[ 30.320] (II) Open ACPI successful (/var/run/acpid.socket)
[ 30.320] Initializing built-in extension Generic Event Extension
[ 30.320] Initializing built-in extension SHAPE
[ 30.320] Initializing built-in extension MIT-SHM
[ 30.320] Initializing built-in extension XInputExtension
[ 30.320] Initializing built-in extension XTEST
[ 30.320] Initializing built-in extension BIG-REQUESTS
[ 30.320] Initializing built-in extension SYNC
[ 30.320] Initializing built-in extension XKEYBOARD
[ 30.320] Initializing built-in extension XC-MISC
[ 30.320] Initializing built-in extension SECURITY
[ 30.320] Initializing built-in extension XINERAMA
[ 30.320] Initializing built-in extension XFIXES
[ 30.320] Initializing built-in extension RENDER
[ 30.320] Initializing built-in extension RANDR
[ 30.320] Initializing built-in extension COMPOSITE
[ 30.320] Initializing built-in extension DAMAGE
[ 30.320] Initializing built-in extension MIT-SCREEN-SAVER
[ 30.320] Initializing built-in extension DOUBLE-BUFFER
[ 30.320] Initializing built-in extension RECORD
[ 30.320] Initializing built-in extension DPMS
[ 30.320] Initializing built-in extension X-Resource
[ 30.320] Initializing built-in extension XVideo
[ 30.320] Initializing built-in extension XVideo-MotionCompensation
[ 30.320] Initializing built-in extension SELinux
[ 30.321] Initializing built-in extension XFree86-VidModeExtension
[ 30.321] Initializing built-in extension XFree86-DGA
[ 30.321] Initializing built-in extension XFree86-DRI
[ 30.321] Initializing built-in extension DRI2
[ 30.321] (II) "glx" will be loaded by default.
[ 30.321] (WW) "xmir" is not to be loaded by default. Skipping.
[ 30.321] (II) LoadModule: "dri2"
[ 30.321] (II) Module "dri2" already built-in
[ 30.321] (II) LoadModule: "glamoregl"
[ 30.428] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 30.745] (II) Module glamoregl: vendor="X.Org Foundation"
[ 30.745] compiled for 1.14.2.901, module version = 0.5.1
[ 30.745] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.745] (II) LoadModule: "glx"
[ 30.745] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 30.745] (II) Module glx: vendor="X.Org Foundation"
[ 30.745] compiled for 1.14.3, module version = 1.0.0
[ 30.745] ABI class: X.Org Server Extension, version 7.0
[ 30.745] (==) AIGLX enabled
[ 30.745] Loading extension GLX
[ 30.745] (==) Matched nvidia as autoconfigured driver 0
[ 30.745] (==) Matched nouveau as autoconfigured driver 1
[ 30.745] (==) Matched nvidia as autoconfigured driver 2
[ 30.745] (==) Matched nouveau as autoconfigured driver 3
[ 30.745] (==) Matched vesa as autoconfigured driver 4
[ 30.745] (==) Matched modesetting as autoconfigured driver 5
[ 30.745] (==) Matched fbdev as autoconfigured driver 6
[ 30.745] (==) Assigned the driver to the xf86ConfigLayout
[ 30.745] (II) LoadModule: "nvidia"
[ 30.746] (WW) Warning, couldn't open module nvidia
[ 30.746] (II) UnloadModule: "nvidia"
[ 30.746] (II) Unloading nvidia
[ 30.746] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 30.746] (II) LoadModule: "nouveau"
[ 30.746] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 30.790] (II) Module nouveau: vendor="X.Org Foundation"
[ 30.790] compiled for 1.14.2.901, module version = 1.0.9
[ 30.790] Module class: X.Org Video Driver
[ 30.790] ABI class: X.Org Video Driver, version 14.1
[ 30.790] (II) LoadModule: "vesa"
[ 30.790] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 30.790] (II) Module vesa: vendor="X.Org Foundation"
[ 30.790] compiled for 1.14.1, module version = 2.3.2
[ 30.790] Module class: X.Org Video Driver
[ 30.790] ABI class: X.Org Video Driver, version 14.1
[ 30.790] (II) LoadModule: "modesetting"
[ 30.790] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 30.790] (II) Module modesetting: vendor="X.Org Foundation"
[ 30.790] compiled for 1.14.1, module version = 0.8.0
[ 30.790] Module class: X.Org Video Driver
[ 30.790] ABI class: X.Org Video Driver, version 14.1
[ 30.790] (II) LoadModule: "fbdev"
[ 30.790] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 30.790] (II) Module fbdev: vendor="X.Org Foundation"
[ 30.790] compiled for 1.14.1, module version = 0.4.3
[ 30.790] Module class: X.Org Video Driver
[ 30.790] ABI class: X.Org Video Driver, version 14.1
[ 30.790] (==) Matched nvidia as autoconfigured driver 0
[ 30.790] (==) Matched nouveau as autoconfigured driver 1
[ 30.790] (==) Matched nvidia as autoconfigured driver 2
[ 30.790] (==) Matched nouveau as autoconfigured driver 3
[ 30.790] (==) Matched vesa as autoconfigured driver 4
[ 30.790] (==) Matched modesetting as autoconfigured driver 5
[ 30.790] (==) Matched fbdev as autoconfigured driver 6
[ 30.790] (==) Assigned the driver to the xf86ConfigLayout
[ 30.791] (II) LoadModule: "nvidia"
[ 30.791] (WW) Warning, couldn't open module nvidia
[ 30.791] (II) UnloadModule: "nvidia"
[ 30.791] (II) Unloading nvidia
[ 30.791] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 30.791] (II) LoadModule: "nouveau"
[ 30.791] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 30.791] (II) Module nouveau: vendor="X.Org Foundation"
[ 30.791] compiled for 1.14.2.901, module version = 1.0.9
[ 30.791] Module class: X.Org Video Driver
[ 30.791] ABI class: X.Org Video Driver, version 14.1
[ 30.791] (II) UnloadModule: "nouveau"
[ 30.791] (II) Unloading nouveau
[ 30.791] (II) Failed to load module "nouveau" (already loaded, 0)
[ 30.791] (II) LoadModule: "vesa"
[ 30.791] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 30.791] (II) Module vesa: vendor="X.Org Foundation"
[ 30.791] compiled for 1.14.1, module version = 2.3.2
[ 30.791] Module class: X.Org Video Driver
[ 30.791] ABI class: X.Org Video Driver, version 14.1
[ 30.791] (II) UnloadModule: "vesa"
[ 30.791] (II) Unloading vesa
[ 30.791] (II) Failed to load module "vesa" (already loaded, 0)
[ 30.791] (II) LoadModule: "modesetting"
[ 30.792] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 30.792] (II) Module modesetting: vendor="X.Org Foundation"
[ 30.792] compiled for 1.14.1, module version = 0.8.0
[ 30.792] Module class: X.Org Video Driver
[ 30.792] ABI class: X.Org Video Driver, version 14.1
[ 30.792] (II) UnloadModule: "modesetting"
[ 30.792] (II) Unloading modesetting
[ 30.792] (II) Failed to load module "modesetting" (already loaded, 0)
[ 30.792] (II) LoadModule: "fbdev"
[ 30.792] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 30.792] (II) Module fbdev: vendor="X.Org Foundation"
[ 30.792] compiled for 1.14.1, module version = 0.4.3
[ 30.792] Module class: X.Org Video Driver
[ 30.792] ABI class: X.Org Video Driver, version 14.1
[ 30.792] (II) UnloadModule: "fbdev"
[ 30.792] (II) Unloading fbdev
[ 30.792] (II) Failed to load module "fbdev" (already loaded, 0)
[ 30.792] (II) NOUVEAU driver Date: Wed Jul 31 10:51:03 2013 +1000
[ 30.792] (II) NOUVEAU driver for NVIDIA chipset families :
[ 30.792] RIVA TNT (NV04)
[ 30.792] RIVA TNT2 (NV05)
[ 30.792] GeForce 256 (NV10)
[ 30.792] GeForce 2 (NV11, NV15)
[ 30.792] GeForce 4MX (NV17, NV18)
[ 30.792] GeForce 3 (NV20)
[ 30.792] GeForce 4Ti (NV25, NV28)
[ 30.792] GeForce FX (NV3x)
[ 30.792] GeForce 6 (NV4x)
[ 30.792] GeForce 7 (G7x)
[ 30.792] GeForce 8 (G8x)
[ 30.792] GeForce GTX 200 (NVA0)
[ 30.792] GeForce GTX 400 (NVC0)
[ 30.792] (II) VESA: driver for VESA chipsets: vesa
[ 30.792] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 30.792] (II) FBDEV: driver for framebuffer: fbdev
[ 30.792] (++) using VT number 7

[ 30.793] (II) [drm] nouveau interface version: 1.1.1
[ 30.793] (WW) Falling back to old probe method for vesa
[ 30.793] (WW) Falling back to old probe method for modesetting
[ 30.793] (WW) Falling back to old probe method for fbdev
[ 30.793] (II) Loading sub module "fbdevhw"
[ 30.793] (II) LoadModule: "fbdevhw"
[ 30.793] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 30.793] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 30.793] compiled for 1.14.3, module version = 0.0.2
[ 30.793] ABI class: X.Org Video Driver, version 14.1
[ 30.793] (II) Loading sub module "dri2"
[ 30.793] (II) LoadModule: "dri2"
[ 30.793] (II) Module "dri2" already built-in
[ 30.793] (--) NOUVEAU(0): Chipset: "NVIDIA NV42"
[ 30.793] (II) NOUVEAU(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 30.793] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 30.793] (==) NOUVEAU(0): RGB weight 888
[ 30.793] (==) NOUVEAU(0): Default visual is TrueColor
[ 30.793] (==) NOUVEAU(0): Using HW cursor
[ 30.793] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 30.793] (==) NOUVEAU(0): Page flipping enabled
[ 30.793] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 30.822] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 30.880] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section
[ 30.908] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 30.908] (II) NOUVEAU(0): Manufacturer: MED Model: 7b8 Serial#: 5681
[ 30.908] (II) NOUVEAU(0): Year: 2005 Week: 4
[ 30.908] (II) NOUVEAU(0): EDID Version: 1.3
[ 30.908] (II) NOUVEAU(0): Analog Display Input, Input Voltage
Level: 0.700/0.700 V
[ 30.908] (II) NOUVEAU(0): Sync: Separate
[ 30.909] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 30.909] (II) NOUVEAU(0): Gamma: 2.50
[ 30.909] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[ 30.909] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 30.909] (II) NOUVEAU(0): redX: 0.645 redY: 0.348 greenX: 0.280
greenY: 0.605
[ 30.909] (II) NOUVEAU(0): blueX: 0.142 blueY: 0.071 whiteX: 0.313
whiteY: 0.329
[ 30.909] (II) NOUVEAU(0): Supported established timings:
[ 30.909] (II) NOUVEAU(0): 720x400@70Hz
[ 30.909] (II) NOUVEAU(0): 640x480@60Hz
[ 30.909] (II) NOUVEAU(0): 640x480@72Hz
[ 30.909] (II) NOUVEAU(0): 640x480@75Hz
[ 30.909] (II) NOUVEAU(0): 800x600@56Hz
[ 30.909] (II) NOUVEAU(0): 800x600@60Hz
[ 30.909] (II) NOUVEAU(0): 800x600@72Hz
[ 30.909] (II) NOUVEAU(0): 800x600@75Hz
[ 30.909] (II) NOUVEAU(0): 1024x768@60Hz
[ 30.909] (II) NOUVEAU(0): 1024x768@70Hz
[ 30.909] (II) NOUVEAU(0): 1024x768@75Hz
[ 30.909] (II) NOUVEAU(0): 1280x1024@75Hz
[ 30.909] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 30.909] (II) NOUVEAU(0): Supported standard timings:
[ 30.909] (II) NOUVEAU(0): #0: hsize: 640 vsize 400 refresh: 70
vid: 2609
[ 30.909] (II) NOUVEAU(0): #4: hsize: 1280 vsize 1024 refresh: 60
vid: 32897
[ 30.909] (II) NOUVEAU(0): Supported detailed timing:
[ 30.909] (II) NOUVEAU(0): clock: 25.2 MHz Image Size: 337 x 270 mm
[ 30.909] (II) NOUVEAU(0): h_active: 640 h_sync: 688 h_sync_end 784
h_blank_end 800 h_border: 0
[ 30.909] (II) NOUVEAU(0): v_active: 350 v_sync: 350 v_sync_end 352
v_blanking: 449 v_border: 0
[ 30.909] (II) NOUVEAU(0): Monitor name: MD30217PG
[ 30.909] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30
H max: 83 kHz, PixClock max 145 MHz
[ 30.909] (II) NOUVEAU(0): Serial No: 501045681
[ 30.909] (II) NOUVEAU(0): EDID (in hex):
[ 30.909] (II) NOUVEAU(0): 00ffffffffffff0034a4b80731160000
[ 30.909] (II) NOUVEAU(0): 040f010368221b962a0c55a559479b24
[ 30.909] (II) NOUVEAU(0): 125054afcf00310a0101010101018180
[ 30.909] (II) NOUVEAU(0): 000000000000d60980a0205e63103060
[ 30.909] (II) NOUVEAU(0): 0200510e1100001e000000fc004d4433
[ 30.909] (II) NOUVEAU(0): 3032313750470a202020000000fd0038
[ 30.909] (II) NOUVEAU(0): 4c1e530e000a202020202020000000ff
[ 30.909] (II) NOUVEAU(0): 003530313034353638310a2020200035
[ 30.909] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 30.909] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 30.909] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 30.909] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024
1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 30.909] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024
1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 30.909] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024
1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 30.909] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 30.909] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 30.909] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 30.909] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 30.909] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 30.909] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664
704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 30.909] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 30.909] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 30.909] (II) NOUVEAU(0): Modeline "640x350"x70.1 25.18 640 688
784 800 350 350 352 449 +hsync +vsync (31.5 kHz e)
[ 30.964] (II) NOUVEAU(0): EDID for output DVI-I-2
[ 30.964] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 30.964] (II) NOUVEAU(0): Output DVI-I-2 disconnected
[ 30.964] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 30.964] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1280x1024
[ 30.964] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0)
unless otherwise stated.
[ 30.964] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[ 30.964] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz
(scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 30.964] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 30.964] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz
(scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 30.964] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 30.964] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled
from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 30.964] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024
1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 30.964] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled
from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 30.964] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024
1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 30.964] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled
from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 30.964] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024
1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 30.964] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled
from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 30.964] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 30.964] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled
from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 30.964] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 30.964] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled
from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 30.964] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 30.964] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled
from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 30.964] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 30.964] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled
from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 30.964] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 30.964] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled
from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 30.964] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664
704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 30.964] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled
from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 30.964] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 30.964] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled
from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 30.964] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 30.964] (**) NOUVEAU(0): Driver mode "640x350": 25.2 MHz (scaled
from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 30.964] (II) NOUVEAU(0): Modeline "640x350"x70.1 25.18 640 688
784 800 350 350 352 449 +hsync +vsync (31.5 kHz e)
[ 30.964] (==) NOUVEAU(0): DPI set to (96, 96)
[ 30.964] (II) Loading sub module "fb"
[ 30.964] (II) LoadModule: "fb"
[ 30.964] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 30.965] (II) Module fb: vendor="X.Org Foundation"
[ 30.965] compiled for 1.14.3, module version = 1.0.0
[ 30.965] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.965] (II) Loading sub module "exa"
[ 30.965] (II) LoadModule: "exa"
[ 30.965] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 30.965] (II) Module exa: vendor="X.Org Foundation"
[ 30.965] compiled for 1.14.3, module version = 2.6.0
[ 30.965] ABI class: X.Org Video Driver, version 14.1
[ 30.965] (II) Loading sub module "shadowfb"
[ 30.965] (II) LoadModule: "shadowfb"
[ 30.965] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 30.965] (II) Module shadowfb: vendor="X.Org Foundation"
[ 30.965] compiled for 1.14.3, module version = 1.0.0
[ 30.965] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.965] (II) UnloadModule: "vesa"
[ 30.965] (II) Unloading vesa
[ 30.965] (II) UnloadModule: "modesetting"
[ 30.965] (II) Unloading modesetting
[ 30.965] (II) UnloadModule: "fbdev"
[ 30.965] (II) Unloading fbdev
[ 30.965] (II) UnloadSubModule: "fbdevhw"
[ 30.965] (II) Unloading fbdevhw
[ 30.965] (--) Depth 24 pixmap format is 32 bpp
[ 30.966] (II) NOUVEAU(0): Opened GPU channel 0
[ 30.967] (II) NOUVEAU(0): [DRI2] Setup complete
[ 30.967] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 30.967] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 30.967] (II) EXA(0): Driver allocated offscreen pixmaps
[ 30.967] (II) EXA(0): Driver registered support for the following
operations:
[ 30.968] (II) Solid
[ 30.968] (II) Copy
[ 30.968] (II) Composite (RENDER acceleration)
[ 30.968] (II) UploadToScreen
[ 30.968] (II) DownloadFromScreen
[ 30.968] (==) NOUVEAU(0): Backing store disabled
[ 30.968] (==) NOUVEAU(0): Silken mouse enabled
[ 30.968] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[ 30.968] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 30.968] (==) NOUVEAU(0): DPMS enabled
[ 30.968] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following
RandR disabled message.
[ 30.968] (--) RandR disabled
[ 30.975] (II) SELinux: Disabled on system
[ 31.147] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 31.147] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 31.147] (II) AIGLX: enabled GLX_ARB_create_context
[ 31.147] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 31.147] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 31.147] (II) AIGLX: enabled GLX_SGI_swap_control and
GLX_MESA_swap_control
[ 31.147] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer
objects
[ 31.148] (II) AIGLX: Loaded and initialized nouveau
[ 31.148] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 31.150] (II) NOUVEAU(0): NVEnterVT is called.
[ 31.151] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[ 31.151] resize called 1280 1024
[ 31.161] (II) XKB: reuse xkmfile
/var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 31.164] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 31.164] (**) Power Button: Applying InputClass "evdev keyboard
catchall"
[ 31.164] (II) LoadModule: "evdev"
[ 31.164] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 31.184] (II) Module evdev: vendor="X.Org Foundation"
[ 31.184] compiled for 1.14.1, module version = 2.7.3
[ 31.184] Module class: X.Org XInput Driver
[ 31.184] ABI class: X.Org XInput driver, version 19.1
[ 31.184] (II) Using input driver 'evdev' for 'Power Button'
[ 31.184] (**) Power Button: always reports core events
[ 31.184] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 31.184] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 31.185] (--) evdev: Power Button: Found keys
[ 31.185] (II) evdev: Power Button: Configuring as keyboard
[ 31.185] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 31.185] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[ 31.185] (**) Option "xkb_rules" "evdev"
[ 31.185] (**) Option "xkb_model" "pc105"
[ 31.185] (**) Option "xkb_layout" "de"
[ 31.187] (II) XKB: reuse xkmfile
/var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm
[ 31.187] (II) config/udev: Adding input device Power Button
(/dev/input/event0)
[ 31.187] (**) Power Button: Applying InputClass "evdev keyboard
catchall"
[ 31.187] (II) Using input driver 'evdev' for 'Power Button'
[ 31.187] (**) Power Button: always reports core events
[ 31.187] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 31.187] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 31.187] (--) evdev: Power Button: Found keys
[ 31.187] (II) evdev: Power Button: Configuring as keyboard
[ 31.187] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 31.187] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 7)
[ 31.187] (**) Option "xkb_rules" "evdev"
[ 31.187] (**) Option "xkb_model" "pc105"
[ 31.187] (**) Option "xkb_layout" "de"
[ 31.188] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 31.188] (II) config/udev: Ignoring already known drm device
(/dev/dri/card0)
[ 31.188] (II) config/udev: Adding input device HDA Intel Front
Headphone (/dev/input/event4)
[ 31.188] (II) No input driver specified, ignoring this device.
[ 31.188] (II) This device may have been added with another device file.
[ 31.188] (II) config/udev: Adding input device HDA Intel Line Out
(/dev/input/event5)
[ 31.188] (II) No input driver specified, ignoring this device.
[ 31.188] (II) This device may have been added with another device file.
[ 31.188] (II) config/udev: Adding input device HDA Intel Front Mic
(/dev/input/event6)
[ 31.188] (II) No input driver specified, ignoring this device.
[ 31.188] (II) This device may have been added with another device file.
[ 31.189] (II) config/udev: Adding input device HDA Intel Rear Mic
(/dev/input/event7)
[ 31.189] (II) No input driver specified, ignoring this device.
[ 31.189] (II) This device may have been added with another device file.
[ 31.189] (II) config/udev: Adding input device PIXART USB OPTICAL
MOUSE (/dev/input/event3)
[ 31.189] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev
pointer catchall"
[ 31.189] (II) Using input driver 'evdev' for 'PIXART USB OPTICAL MOUSE'
[ 31.189] (**) PIXART USB OPTICAL MOUSE: always reports core events
[ 31.189] (**) evdev: PIXART USB OPTICAL MOUSE: Device:
"/dev/input/event3"
[ 31.189] (--) evdev: PIXART USB OPTICAL MOUSE: Vendor 0x93a Product
0x2510
[ 31.189] (--) evdev: PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
[ 31.189] (--) evdev: PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
[ 31.189] (--) evdev: PIXART USB OPTICAL MOUSE: Found relative axes
[ 31.189] (--) evdev: PIXART USB OPTICAL MOUSE: Found x and y
relative axes
[ 31.189] (II) evdev: PIXART USB OPTICAL MOUSE: Configuring as mouse
[ 31.189] (II) evdev: PIXART USB OPTICAL MOUSE: Adding scrollwheel
support
[ 31.189] (**) evdev: PIXART USB OPTICAL MOUSE: YAxisMapping: buttons
4 and 5
[ 31.189] (**) evdev: PIXART USB OPTICAL MOUSE: EmulateWheelButton:
4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31.189] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3/event3"
[ 31.189] (II) XINPUT: Adding extended input device "PIXART USB
OPTICAL MOUSE" (type: MOUSE, id 8)
[ 31.189] (II) evdev: PIXART USB OPTICAL MOUSE: initialized for
relative axes.
[ 31.189] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration
scheme 1
[ 31.189] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 31.189] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor:
2.000
[ 31.189] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration
threshold: 4
[ 31.190] (II) config/udev: Adding input device PIXART USB OPTICAL
MOUSE (/dev/input/mouse0)
[ 31.190] (II) No input driver specified, ignoring this device.
[ 31.190] (II) This device may have been added with another device file.
[ 31.190] (II) config/udev: Adding input device AT Translated Set 2
keyboard (/dev/input/event2)
[ 31.190] (**) AT Translated Set 2 keyboard: Applying InputClass
"evdev keyboard catchall"
[ 31.190] (II) Using input driver 'evdev' for 'AT Translated Set 2
keyboard'
[ 31.190] (**) AT Translated Set 2 keyboard: always reports core events
[ 31.190] (**) evdev: AT Translated Set 2 keyboard: Device:
"/dev/input/event2"
[ 31.190] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1
Product 0x1
[ 31.190] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 31.190] (II) evdev: AT Translated Set 2 keyboard: Configuring as
keyboard
[ 31.190] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 31.190] (II) XINPUT: Adding extended input device "AT Translated
Set 2 keyboard" (type: KEYBOARD, id 9)
[ 31.190] (**) Option "xkb_rules" "evdev"
[ 31.190] (**) Option "xkb_model" "pc105"
[ 31.190] (**) Option "xkb_layout" "de"
[ 37.887] (II) NOUVEAU(0): EDID vendor "MED", prod id 1976
[ 37.887] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 37.887] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 37.887] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 37.887] (II) NOUVEAU(0): Modeline "640x350"x0.0 25.18 640 688
784 800 350 350 352 449 +hsync +vsync (31.5 kHz eP)
[ 37.887] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 37.887] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 37.887] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 37.888] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664
704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 37.888] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 37.888] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 37.888] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 37.888] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 37.888] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048
1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 37.888] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 37.888] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 37.888] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 37.888] (II) NOUVEAU(0): Modeline "640x400"x70.0 23.35 640 656
720 800 400 401 404 417 -hsync +vsync (29.2 kHz e)
[ 37.888] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 40.985] (II) NOUVEAU(0): EDID vendor "MED", prod id 1976
[ 40.985] (II) NOUVEAU(0): Using hsync ranges from config file
[ 40.985] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 40.985] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 40.985] (II) NOUVEAU(0): Modeline "640x350"x0.0 25.18 640 688
784 800 350 350 352 449 +hsync +vsync (31.5 kHz eP)
[ 40.985] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 40.985] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 40.985] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 40.985] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664
704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 40.985] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 40.985] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 40.985] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 40.985] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 40.985] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048
1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 40.985] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 40.985] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 40.985] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 40.985] (II) NOUVEAU(0): Modeline "640x400"x70.0 23.35 640 656
720 800 400 401 404 417 -hsync +vsync (29.2 kHz e)
[ 40.985] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 41.069] (II) NOUVEAU(0): EDID vendor "MED", prod id 1976
[ 41.069] (II) NOUVEAU(0): Using hsync ranges from config file
[ 41.069] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 41.069] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 41.069] (II) NOUVEAU(0): Modeline "640x350"x0.0 25.18 640 688
784 800 350 350 352 449 +hsync +vsync (31.5 kHz eP)
[ 41.069] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 41.069] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 41.069] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 41.069] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664
704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 41.069] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 41.069] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 41.069] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 41.069] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 41.069] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048
1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 41.069] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 41.069] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 41.069] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 41.069] (II) NOUVEAU(0): Modeline "640x400"x70.0 23.35 640 656
720 800 400 401 404 417 -hsync +vsync (29.2 kHz e)
[ 41.069] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 4976.054] (EE) NOUVEAU(0): [DRI2] DRI2SwapComplete: bad drawable
390:~$



Regards Sophie







Am 31.10.2013 14:26, schrieb highskywhy@yahoo.de:
> Good afternoon
> I did yesterday
> update
> and then
> very often there is frozen screen.
> What can I do?
>
>
> problem crash package xserver xorg core 2:1 14.3
> 3 ubuntu2
> x org crashed with sigabrt.
>
> This is an error message
>
> Regards
> Sophie
>
>
>
>
> ------------------------------------
>
> To unsubscribe from this list, please email LINUX_Newbies-unsubscribe@yahoogroups.com & you will be removed.Yahoo Groups Links
>
>
>
>



------------------------------------

To unsubscribe from this list, please email LINUX_Newbies-unsubscribe@yahoogroups.com & you will be removed.Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/LINUX_Newbies/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/LINUX_Newbies/join
(Yahoo! ID required)

<*> To change settings via email:
LINUX_Newbies-digest@yahoogroups.com
LINUX_Newbies-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
LINUX_Newbies-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
http://info.yahoo.com/legal/us/yahoo/utos/terms/

No comments:

Post a Comment